Internal components of advertising engraving machine maintenance

Want to know more about the advertising engraving machine hand information please pay attention to http://www.shyidiao.com/.

In fact, machinery and equipment of all kinds by interior element itself to support the work time, so fault in mechanical equipment do not have to worry about, first check the internal components. Advertising engraving machine is not exceptional also, common in the internal components of fault table now the following points:
A, advertising engraving machine spindle can not be the normal operation of. First to check the following converter LED display will show the error code. The motor reversal to check the electrical lines are phase will output UVW arbitrary swap ends end.
Two, advertising engraving machine three shaft has a shaft to move, this time to check the corresponding shaft corresponding driving block can damage. Inspection methods can use the exchange of law: the real aviation plug shaft corresponding to the inserted corresponds in other active shaft drive.
Three, if the exchange does not move around the normal axis, can clarify the driving block of the axis corresponding to the damaged, demand change a good driver block. If the real axis or not that there is something wrong with the change of cable cable or motor or motor. The three axes are not moving. At this point to check the three axis engraving machine air plug can have good connection and control box, control box whether the power supply has been opened. The data line and a control box and the host computer can control card cohesion.