Application of desktop engraving machine

On the desktop engraving machine aspects of information please pay attention to http://www.shyidiao.com/ for more details.

1 wood cut: cut wood desktop engraving machine depth is usually not deep, maximum power cut depth depends on the wood materials and laser, such as to cut very thick wood, can slow down the open speed, but can constitute a wood calm. Concrete operation can check using high standard lens, and selection of incision to repeat.
2 Desktop engraving machine can be carved carpenter data
A, log (unprocessed wood) wood is by far the most commonly used laser processing data, very simple cut and cut. Light colored wood like birch, cherry or maple is simple by laser vaporization, thus more appropriate carving. Each wood has its own characteristics, some fine some, such as hardwood, to greater laser power in polish or cut. We claim that Polish desktop engraving machine not cooked wood, to the main research carve characteristics.
B, plywood: desktop engraving machine carving the plywood is original not much difference with carved in wood, just a bit to watch, not too deep carving depth. Plywood edge after the cut would also like timber blackening, if see plywood is crucial to use that wood.
3 color: wood carving usually has a parched feel the beauty of art with an initial match with wood color, the color depth mainly depends on the laser power and the carving speed. But some wood is usually soft texture of the kind, no matter what you can't change the color (such as birch). Desktop engraving machine advice to scrap the color, can use acrylic paint.
4 wood carving: Generally speaking, on the wood carving is often overcast carving, carved deep depth and often begged. This power is usually set higher, if encounter hard wood can make carved graphics color becomes deep. If you want to make the lighter color, can advance carving speed, try to carve a few times. Some wood will attack some smoke attached to a wooden surface polish, if the wood has brush paint can be used wet cloth to wipe the assumption that watch, unpainted can not wipe clean, constitute items appearance fouling.