The water tank and a fan of Shanghai embossed machine | laser equipment problems

Want to know more about the Shanghai relief machine information please pay attention to http://www.shyidiao.com/.

Shanghai relief machine suggests keeping a clean water tank and clean circulating water once a week. The machine before operation must ensure that the laser tube is full of circulating water. Water quality and temperature of circulating water effect of laser tube through time, Shanghai relief machine recommend the use of clean water, and the water temperature must be controlled at 35 DEG C. But higher than 35 DEG C need to transform the circulating water, or added to water ice water temperature decreases, (advise users to choose cooling machine, two water tanks or use).

Shanghai relief about clean water tank (for water) methods: primary power off, unplug the water inlet pipe, so that the laser tube water active flows into the water tank, pull off the hose, signal line. Open the water tank, the water cooler inside the dirt drain the conversion, good water circulation, connecting pipe signal line, the joint order. Open the power supply, and work for 2-3 minutes (so that the laser tube filled with circulating water).

Shanghai relief machine learned fan long-term operation, makes the fan inside the accumulation of many particles like dust, making the fan generates large noise, and is not conducive to the exhaust and odor removal. When the suction exhaust fan lack not when free, first close the power, the air inlet pipe and the air outlet pipe to unload the wind machine, get rid of the inside of the dust, and then the fan upside down, and pull the wind leaf inside, until clean clean, and then the fan equipment.