Stone engraving machine maintenance

Want to know more about the stone carving machine information please pay attention to http://www.shyidiao.com/.

Go home to buy stone engraving machine engraving machine, carpenter how many there will be some small questions, are generally manufacturers call to solve the more general solution, after all not in limbo, less technical exchanges, so when the stone engraving machine, engraving machine can not carpenter normal operation, may be the the internal components out of the question is perhaps the reason why other aspects, following a stone engraving machine often doubt roughly introduce.
(1) the spindle can not work normally. The first view of inverter LED flash screen flashes of error code.
(2) with a shaft to move three axis, at the moment to check the corresponding shaft corresponding driving block can damage. The method can be used to view the exchange of law: the real aviation plug shaft corresponding to the inserted corresponds in other active shaft drive.
(3) stone carving machine communication after the real axis if walking normal, can drive the shaft of the corresponding block has been damaged, need to convert good driving block. Assuming that real axis still is not enough to explain the motor cable or faulty cable may convert motor. The three axes are not moving. Now check the three axis air plug can have good connection and control box, control box whether the power supply has been opened. The data line and a control box and the host computer can control card cohesion. Assuming the above are all normal, please contact the manufacturer and.