How to remove the burr Shanghai relief machine complete

Relief engraving machine engraving machine is based on the process name, relief engraving machine can make the relief pattern exquisite in stone, wood, PVC, acrylic and other non-metallic materials, many customers now machine carved, there will be some rough burr or local workpiece. Many customers think carve up directly to sell or use, in fact, slightly cut and polish the workpiece burr is a normal phenomenon, there are many factors of burrs generated data, for example, cutting tool, tool path, the machine quality etc..

Data, fast-growing Yang Maoci clearly than pine, mahogany and other hard wood, another tool tip diameter is larger, the wear level analogy ferocious are essential to produce burr. Way to set unreasonable, the feed speed is too fast, burr more. If the fine knife, slow speed is carved, carved out of the lubrication of the good precision, but slow to a certain level, the processing time will be greatly extended, profits will seriously squeeze. So it is necessary to have a very fruitful way to deal with.

General in Shanghai relief engraving machine is completed will use polishing machine polishing, so after the grinding lubrication degree and precision could reach the request.